SoCal Swordfight 2024

Tournament Rules

Select Rules: Rules:

Longsword Rules

This document provides the rules specific to the Longsword Tournaments. All rules outlined in the General Tournament Standards also apply to the longsword tournaments, and offer more depth on the criteria for scoring actions.

Rules are subject to change up to the commencement of the tournament.

 

 

Tournament Goal

The goal of the Longsword tournament is to both showcase and help develop skill in utilizing the longsword for the purpose of unarmored combat, as outlined by the KdF tradition. (Of course, all other traditions are invited to play!) This includes the use of the longsword as a sharp sword. Tournament rules and judging standards are meant to advance fundamental skills, such as integrating cutting mechanics into antagonistic sparring. A match is not a simulation of a sword duel.

In the use of a longsword there are times when you would wish to use different types of striking mechanics, but if you don’t demonstrate high quality strikes when asked to, it shows you are not capable of them. It is the goal of SoCal Swordfight to stress test high quality striking interpretations and push the fighters to achieve these. There are many other existing venues which test a fencer's skill and ability to achieve touches as quickly as possible.

SoCal Swordfight will seed fighters into appropriate tournament tier based on results of past longsword tournaments, with the aim of creating as many meaningful matches as possible. (aka matches where you are close in skill to your opponent.)

 

 

Cutting Qualification

All participants for Open Steel Longsword must pass a cutting qualification before being eligible to compete. The qualification is valid for 2 years from the time it is completed. (There is no limit on the number of re-tries to pass the qualification).

Individuals who have not pre-qualified based on cutting at previous events must attend the scheduled cutting qualification time slot. For more information on the cutting qualification please refer to the cutting tournament rules. (Entry in the cutting tournament is not required)

 

 

Illegal Actions

 

 

Scoring Actions

Matches will be fought until a fighter reaches a score of 7 points.

 

3 Point Actions

1 Point Actions

 

+1 point for Controlling Action

Afterblow and Double Hits will be scored in accordance with the General Tournament Rules. (Afterblow is -1 from initial score. Don’t double.)

 

One-handed strikes are not permitted except when the hand is removed as part of a grappling technique executed against an opponent.

Controlling Action

If any valid scoring action is deemed to be a Controlling Action an extra (1) point will be awarded over and above the normal point value awarded. A controlling action is defined as a blow which either seizes control of the opponent’s blade (eg: constrained thrust) or primary weapon arm (eg: grapple or slice) at the moment of impact. No controlling action can be scored in the event of an afterblow.

Wrestling and Takedowns

Wrestling

The amount of time permitted for a wrestling action is a 5-count from the director; beginning when both of the swords are inhibited (discarded, entangled, etc). This count may or may not be verbalized at the director's discretion.

Throws/Takedowns

Throws/takedowns are only permitted in Longsword Open Tier-A & Tier-B, and URG Tier-A. No throws/takedowns in Open Tier-C & Unrated, URG Tier-B, and U18. As per the General Tournament Rules high amplitude throws and leg wraps/locks are not permitted.

A standing takedown is a wrestling action that deliberately and safely puts the opponent on the ground, while the throwing fighter remains standing. Standing requires one foot remain on the ground, dropping to a single knee is acceptable.

For a takedown to qualify as a Controlling Action, the throwing fighter must retain control of their weapon and demonstrate the ability to deliver a cut or thrust.

 

 

Equipment

All protective equipment and weapons must be inspected prior to competition. A fighter must show up to gear check wearing their equipment.

Protective Equipment

All equipment from the General Tournament Standards is required, in addition to the following:

 

Weapons

Blackfencer Synthetic Longsword will be provided for the U18 Longsword Tournament, all other (steel) longsword tournaments require fighters to provide their own feders.

Swords must match the following specifications:

  1. A 'standard' straight bladed longsword feder is expected ("shiltless feders" designed for high intensity sparring are also permitted. Thin edged 'blunts' are not.).
  2. The point must have an expanded surface area, or be affixed with a tip of some sort.
  3. Blades must be free of any large burs or hilt protrusions which may cause a risk to an opponent's safety or their equipment.
  4. Sword measurements are expected to fall within these ranges:
    • Blade Length: 84 - 102 cm (33 - 40")
    • Overall Length: < 140 cm (55”)
    • Sword Mass: 1.3 - 1.8 kg (2.9 - 3.9 lbs. )
    • Buckling Strength: 10 - 19.5 kg (How is this measured?)
  5. Swords not manufactured by a recognized manufacturer will be tested for an edge hardness above 45 HRC. (Any properly manufactured sword should pass this without difficulty).

Due to safety and quality concerns, the use of any Hanwei feders will be prohibited during this tournament. Final discretion lies with the tournament manager, including judgment on blade design elements that may not be included in this document. The event is under no obligation to allow you to use the sword you have brought.

HEMA Scorecard
Developed by Sean Franklin
A SwordSTEM project
you found me
Supported by the
HEMA Alliance